Barbers frequently ask me to make videos about maintenance and repair issues, which I am happy to do! I believe it is just as important that I share tips on how to avoid damaging your tools so that your equipment gives you the long, faithful service you expect.
Today, we will talk about your bread and butter: clippers and trimmers. If these are not performing well your work flow will be scuppered, customers may be irritated, and money will not be made!
First, it is important to have an array of screw driving tools, not just one screwdriver that you try to use on everything. Using a too-small screwdriver will destroy the pattern atop a screw, making it almost impossible to remove quickly.
One Screwdriver Size does NOT fit all
Imagine a busy Saturday when you need to zero gap your clipper, and you go with a too-small screwdriver, damaging the screw top and being unable to loosen it at all. It’s just that easy to spoil the tools that make your money, kill your workflow and kill the income going into your pocket. This will mess up your big money-making day.
On the other hand, if you try to zero gap a trimmer, which takes a smaller screw, that same screwdriver is too big. You will damage the trimmer screws and lose the delicate touch you need to loosen the screws only lightly, so the tightness of the blade keeps them in position. It’s like trying to use your phone while wearing work gloves!
Even when you have the zero gap, you need to gently retighten the screws, first one side, then the other; back and forth; left then right; left then right. If the screwdriver is too big, you have to put too much downward pressure on it, causing the blade to move. Very frustrating, and another reason you need the right tools.
I urge you invest in quality tools, not just any tools. I’ve found excellent ‘Tool Hub’ tools on E-bay, such as a set of screwdrivers with a broad array of Phillips and flatheads. You need a larger flathead screwdriver for the power screw on the side of the clipper, which you adjust to get the arm closer to the motor. You need a quality flathead screwdriver to do the job.
The ‘Tool Hub’ set also has an array of Phillips heads so you can find the correct one that makes snug contact with the screw head.
You also want to ensure your screwdrivers have a good gripping handle because when it comes to zero gapping, you need a good grip as well as a snug fit with the screw head.
This set also features an array of medium screwdrivers perfect for adjusting hair clippers – a Master or Fademaster or the Senior or Wahl Super Taper. Check it out at this link: (LARRY: INSERT LINK HERE)
For making adjustments on a trimmer’s smaller, finer screws, I’ve found another perfect precision kit with interchangeable flathead and Philips attachments and a telescopic handle, which helps with a host of jobs. It even comes with a magnifying glass, so when you position for a zero gap, you can look along the blade without killing your eyes. I strongly suggest you get this kit. (LARRY: INSERT LINK HERE)
Insider Hack: How to Remove Damaged Screws From Your Clipper and Trimmer
Back in the old days, barbers had to sharpen their cut throat razors using a whetstone and oil and a strop. We have it much easier with today’s excellent electric trimmers and clippers. All we need to know is how to tune these things with a screw driver; no heavy manual labor. It’s a relatively easy job, but it demands that you use the right tools.
Now, here’s today’s Larry the Barberman Insider Hack: If you used the wrong screwdriver and hollowed out the tops of the screws, ordering a new one from the manufacturer is a long and expensive process, perhaps as much as £10 just for delivery – and just for one screw!
But temporarily, all you need is a rubber band. Here’s how it works: Place the rubber band over the screw head you have destroyed and push it down into the screw with a screwdriver, using lots of pressure. Under pressure, the rubber band will mold itself to the contours of the damaged screw in a kind of super grip, like when you can’t open a stubborn bottle with your hand and improve the grip by putting a tea towel over it. It works!
That’s it for today’s How-To blog. Once again, based on what I’ve seen in barbershops all over the world, I strongly recommend you get the right tool for every screw in every clipper- and keep your work flow going!
‘Til next time, happy barbering!
7 pieces screw driver set
Precision screw drivers kit:
USEFUL BARBER LINKS
Barber’s Resource: https://www.instagram.com/barbarvoo/
Barber Videos: http://www.barbers.tv
http://www.larrythebarberman.com ( My Online Store )
Barber Blogs: http://www.frequency60hz.com/blog
Hair Clipper Converters: http://www.frequency60hz.com