avatar

Turn Your Andis U S Pro Li Into a Mean Fading Machine Quick & Easy

My latest tutorial is all about getting more from the Andis USProLi clipper. In general, this is already a great tool with a great battery life and really good cutting power – however I’ve heard from some barbers who’ve found that the bevelled blade isn’t giving them what they need. While bevelled blades are quite versatile and can be very forgiving depending on your cutting style, it is less ideal if you do a lot of fading and, in particular, won’t take out the balding line for a skin fade. So, what can you do to make this clipper work for you?

My recommendation is changing the blade, fitting the ‘66255’ surgical blade that’s used for the gold US Fade clipper. The key difference between the two is that, where the bevelled blade has a 45degree angle, the surgical blade is completely flat which allows you to take out the balding line. It also makes it easier to do a 90degree angle – and also makes it somewhat similar to the Wahl Magic Clip tool.

All you’ll need is a Phillips screwdriver: the first step is to take out the two screws at the top. I recommend working using a matt or towel underneath the clipper, as this will help you keep the screws safe. Once you’ve taken the blade off, start by replacing the blade mount, with the flat side facing away from you and the grooves lined up with the clipper’s spindle and wires. Then position the cutting blade on top, making sure that there’s a small gap between the blade mount and the cutting blade. Finally, replace the fixed blade: apply some pressure to it so that it springs down, and replace the screws.

It’s important not to zero gap the clipper at this stage; instead, secure the screws tightly to fix the blade in place, and then loosen them again – but only very slightly. At this point you can zero gap your tool, making sure that the distance from the left and right is equal, and leaving a gap of around 5 strands of hair between the cutting blade and the fixed blade – otherwise you’ll end up cutting your clients! Finally, you need to tighten the screws up, very gently at first and then, once it’s secure, apply some more pressure.

This will give you more range, excellent 90degree angles, and allow you to knock out those balding lines. Just remember to keep your bevelled blade safe, so that if you’re not getting along with surgical blade you can always change it back! If you found this post helpful then please don’t forget to like and subscribe on my YouTube, Instagram and Facebook and make sure you don’t miss out on any upcoming barbering tricks.

 

USEFUL BARBER LINKS

================================================

Barber’s Resource: https://www.instagram.com/barbarvoo/

http://www.barbarvoo.com

=================================================

http://www.instagram.com/larrythebarberman

http://www.facebook.com/larrythebarberman

http://www.larrythebarberman.com

=================================================

Email       info@larrythebarberman.com

=================================================

Barber Videos: http://www.barbers.tv

=================================================

http://www.larrythebarberman.com  ( My Online Store )

=================================================

Barber Blogs:  http://www.frequency60hz.com/blog

=================================================

Hair Clipper Converters: http://www.frequency60hz.com

info@frequency60hz.com

=================================================

Please follow and like us: